GENERAL PURPOSE SDB Series Fiberscopes

Based on innovative new fiberoptic technology, the

                                Danatronics SDB Series

of fiberscope fits into holes as small as ¼ inch diameter – allowing you to look inside machinery, behind walls,

down into drains, or hundreds of other places without costly demolition or disassembly!

Key features include: Cable will reach deep into complex machinery, piping, walls, vents and drains etc Powerful halogen lamp illuminates dark locations for clear viewing Obedient cable maintains its fixed position until readjusted Flexible, omni-directional cable bends in every direction to allow precise viewing Pressure activated light switch is conveniently located but cannot be accidentally left on Integrated focus ring for smooth, continuous focusing Ergonomically designed, non-slip handle fits comfortably in one hand	Offering the same high performance and results as scopes costing 10X as much !
	Various lengths!!                         18", 36", 48", 72", 96"

High performance…..real value!

The high resolution lens provides a clear image of objects as close as 3/4 inch and over 12 inches away while

providing a wide 40 degree field of view. A powerful halogen lamp illuminates dark crevices on demand with the

push of button conveniently located on the handle. The ergonomically designed handle is comfortable to hold

and allows one-handed focusing and light activation.

Rugged and water resistant, SDB Fiberscopes are made of high impact ABS and flexible cable sheathing that

obediently stays in a set position. Adjust the cable into any position and it will stay fixed in place, until you

decide to change it. This feature permits one-handed operation, freeing your other hand for work!

Download a SDB Series Brochure

DV-100 Diameter: 0.4" / 10.5mm
	LENGTH: 18" / 457.2mm

DV-618 Diameter: 0.23" / 5.8mm
	LENGTH: 18" / 457.2mm

DV-300 Diameter: 0.4" / 10.5mm
	LENGTH: 36" / 914.4mm

DV-300E  NEW Diameter: 0." / 11.25mm
	LENGTH: 36" / 914.4mm

DV-636 Diameter: 0.23" / 5.8mm
	LENGTH: 36" / 914.4mm

DV-480 Diameter: 0.4" / 10.5mm
	LENGTH: 48 " / 1219.2mm

DV-720 Diameter: 0.4" / 10.5mm
	LENGTH: 72 " / 1828.8mm

DV-960 Diameter: 0.4" / 10.5mm
	LENGTH: 96 " / 2438.4mm

ACCESSORIES

DV-45KM Accessory Kit, includes:   

                       Clip-On Magnetic Tip – when attached to the tip of the probe, the magnetic tip improves

                                                            control of the tip end by forcing it to maintain contact with internal

                                                            metal structures etc

                        Clip-On Mirror – when attached to the tip of the probe, the clip-on mirror offsets the

                                                            straight-ahead 40 degree field-of-view by 45 degrees. This

                                                            improves the flexibility of the fiberscope by permitting viewing

                                                            around corners and other obstacles without bending the sheath

                        Halogen Bulb - long life Halogen bulb is accessed through the battery compartment and

                                                can be replaced without tools

C-Clamp Camera Adapter- turns your Danatronics SDB Series fiberscope into a camera scope! Attached

to any size SBD fiberscope, the C-Clamp Camera Adapter as seen below allows the operator to document

images for post inspection analysis or for condition trending

DV-300E Industrial Scope (Danatronic's Newest Product Addition)- same as the standard Model

DV300 except includes the following extra upgrades:

                   - high output double LED light source

                   - stainless steel weave shaft cover

                   - molded black sure-grip view boot

                   - refined higher resolution optics

                   - industrial high output Lithium batterries (2 "AA")

NEW Danatronic Option!

Add our ForeEyes Model 2020-C Digital Viewer / Recorder for portable recording of

any Danatronics SDB image!

The Danatronics ForeEyes 2020-C and C-mount adpater supports direct connection to all Danatronics

SDB Series Fiberscopes as well as most other manufacturer's scopes; The Danatronics ForeEyes 2020-C

allows the operator to store up to 4 hours of digital video images for post inspection analysis and reporting. 

Weighing in at under 2 lbs, ForeEyes both compliments and enhances field inspection when used with the

above Danatronics optical inspection system. 

Require hands-free operation, consider adding our ForeEyes Lite

....by combining state of the art heads up display (HUD) with the ForeEyes 2020, you can now inspect

all video applications by simply wearing the heads up display glasses; there is no need for holding an

additional monitor.  Weighing only 12.9 Oz., the ForeEyes Lite is ideal for applications such as inspecting

under vehicles, climbing ladders and any areas where a quick visual inspection is required. Images appear

in front of your eyes equivalent to a 27 inch monitor at 6 feet away, all with 1/4 vga resolution. The operator

can articulate the camera with the 18" articulating wand and turn on the lights to our waterproof ccd camera.

The ForeEyes Lite can even be used with our popular articulating videoprobes (DZ series) ideal for jet engine

inspection and difficult to reach or confided areas

Contact your local Authorized Spectrum Distributor or call 1-613-831-0007 for additional information.

For more information, contact your local Spectrum office or email us at info@spectrum-instruments.com